Here you will find all the information you need to know about any of our products.
Bio Mass Boiler
Wood Pellet Boiler
This state of the art wood pellet boiler, built to the highest engineering standards, comes with a 400 litres stainless steel hopper and electronically controlled auger feed to minimise refuelling. It requires approximately 1.5 * 2.5 metres of floor space and is ideally located in an out building. It is an ideal solution for domestic and light commercial heating, producing minimal carbon emissions.
Read more…
Bio Oil Fired Boiler
Nu-way’s range of bio oil boilers are standard SEDBUK A, high efficiency oil boilers, that have had their burners specially modified to burn different grades of renewable oils, such as rape seed oil or blended standard heating oils, mixed with vegetable oils.
Read more…
Air Source Heat Pump
Even cold air down to temperatures of -15 degrees centigrade, contains sufficient heat to vaporise refrigerants. An EcoAir heat pump does not require a circuit connector to be buried in your garden. Instead heat is transferred by direct vaporisation when air passes through a heat exchanger.A heat pump works by utilising a low boiling point liquid (refrigerant) to absorb solar energy in the air at a low temperature and then releasing this energy when the resulting vapour is condensed at a higher temperature.
Read more…
Ground Source Heat Pump
The temperature of bedrock varies only slightly throughout the year. One or more boreholes are drilled, usually to a depth of between 70 and 150 centimetres, depending on geological and climatic conditions. The collector hose is fed into the borehole, which is filled with water.EcoPart is a ground source heat pump that can be linked to an EcoLogic to provide domestic hot water. The EcoHeat combines a ground source heat pump with a hot water cyclinder in the same casing to provide your hot water solution.
Read more…
Bio Fuel Burners
In some cases existing oil boilers can be adapted to burn bio fuels such as oil made from oil seed rape or palm oil, although we would recommend that you check carefully the source of your fuel.
Read more…
Home Package
Complete packages suitable for certain homes*, SprintBio offer a complete solution for all your domestic heating and hot water needs incorporating EcoSol solar panels, EcoAir air source heat pumps or EcoFlex pellet boilers and EcoIntegrator thermal storage tank.
Read more…
System Enhancements
Nu-way EcoIntegrator Thermal Store
The Nu-way EcoIntegrator tank is a patented thermal storage device of 300 or 400 litres capacity and allows the full integration of a multitude of heating appliances. Its unique design and control system allows it to ensure each heat source is operating at optimal rates, delivering the most cost effective heating/DHW solution.
Read more…
Nu-way EcoLogic
When connecting an EcoAir or EcoPart with an existing installation, the EcoLogic is a complete control solution. The Nu-way EcoLogic handles the total supervision of the heat pump operation as well as the existing boiler. Use of only a few buttons enables operating parameters to be set and adjusted, e.g. required indoor temperature.
We run a one day training course held in Aylesbury for installation engineers. 
The new heating systems use the waste from saw mills, which are compressed into a pellet to give an efficient and eco-friendly heating solution for your home or office.
Bio fuel can be manufactured from many types of plants but the most common sources are palm oil and oil seed rape oil.
Installation, replenishment and maintenance information.
Here you will find answers to common questions people have.